Epson EcoTank L3200, L3210, L3211, L3250, L3251, L3256, and L3260 RESETTER

Description

The Epson L3200 Series Adjustment Program is a specialized service utility designed for the maintenance and repair of the Epson EcoTank L3200, L3210, L3211, L3250, L3251, L3256, and L3260 models.

Part of the newer generation of EcoTank printers, this “Resetter” is the primary tool used by technicians to clear digital locks and perform low-level hardware calibrations that are not available in the standard user print driver.

Primary Purpose: Service Required Error

The most frequent use for the L3200 Series Resetter is to fix the “Service Required” message.

• The Problem: Like all inkjets, these printers have internal waste ink pads that collect excess ink during cleaning cycles. When the internal counter reaches 100%, the printer locks itself to prevent ink from overflowing.

• The Solution: This program allows you to perform a Waste Ink Pad Counter Reset, returning the digital counter to 0% so the printer can resume operation immediately.

  Technical Features & Capabilities

  Tool	Function
  Waste Ink Pad Counter	Resets the Main and Platen pad counters to 0%.
  Power Ink Flushing	High-pressure ink charging to remove stubborn air bubbles or dried ink clogs.
  EEPROM Data Copy	Saves the printer’s internal settings to a file (essential before replacing a motherboard).
  Head ID Setting	Updates the motherboard with the unique ID of a newly installed print head.
  Initial Setting	Resets the printer to its “out-of-the-box” factory configuration.
  Bi-D Adjustment	Fine-tunes the print head for precise bidirectional printing to eliminate blurry text.

• Product Specifications

  • Compatibility: L3200 Series (specifically L3210, L3250, L3251, L3256, L3260).

  • Operating System: Windows 7, 8, 10, 11 (32-bit and 64-bit).

  • Connectivity: USB Cable Connection ONLY. These adjustment programs cannot communicate with the printer via Wi-Fi or Network ports for service tasks.

    How to Reset the L3200 Series

    1. Connect the printer via USB and ensure no other printing tasks are pending.

    2. Run the Adjustment Program (AdjProg.exe).

    3. Click Select -> Choose L3210 or L3250 (depending on your specific model) -> Click OK.

    4. Enter Particular Adjustment Mode.

    5. Select Waste ink pad counter.

    6. Click Check to verify the current counter status.

    7. Check the boxes for Main pad counter and Platen pad counter.

    8. Click Initialize, then turn the printer OFF and ON again.